Torque Values Of The Screw Connections - Otto Bock Start M1 Instructions For Use (Qualified Personnel

Appendices
• Screwdriver (blade width: 2.5 mm)
• Torque wrench (measurement range 5-50 Nm)

11.3 Torque values of the screw connections

Unless otherwise specified, screw connections are tightened with the following torque values:
• Thread diameter M4: 3 Nm
• Thread diameter M5: 5 Nm
• Thread diameter M6: 10 Nm
• Thread diameter M8: 25 Nm
22 | Ottobock Start M1