Temp Display; Selecting Resistance Type Of Temp Probe - Northern Meditec Taurus E Operator's Manual

文件编号：NR-TP-0715-008
The environmental temperature range for body temperature measuring is 0~55° C, the
minimum measuring time is 1s, and the measuring interval is 1s.
Warning

Please measure the body temperature in the specified environmental temperature
range, or else it may be dangerous.

11.5 Temp Display

The monitor can display the body temperature of two channels (T1 and T2) and the alarm
limits, difference between the two temperature (TD) and temperature units. Select Temp
parameter area and open the [Temp Setup] menu.
Temp display area is shown below:

11.6 Selecting Resistance Type of Temp Probe

Select the appropriate [Temp Sensor] value according to the actual resistance of the
temperature probe being used. The specific setting method follows:
 [Menu] smart hotkey → [Main Menu];
Select
 Select [Factory Maintenance] → Enter and confirm the password → [Factory
Maintenance] menu;

In [Factory Maintenance] menu, set [Temp Sensor] to

[10K], probe resistance is 10kΩ ;
 [2K], probe resistance is 2.25kΩ.
Warning
Fig. 12-1 TEMP Parameter Area
版本： 1.0
- 56 -