Volume Control; Setting Parameter Unit - Northern Meditec Taurus E Operator's Manual

文件编号：NR-TP-0715-008
Set the monitor time in the following steps:

Select

 Select [Time Setup >>] → enter [Time Setup] menu;

Select [Date Format], and set the date format in accordance with custom

[YYYY-MM-DD]: Year - Month - Day.

[MM-DD-YYYY]: Month - Day - Year.

[DD-MM-YYYY]: Day - Month - Year.

[Date]: Set the year, month, and day.

[Time]: Set the hour, minute and second.

4.2.4 Volume Control

1. Alarm volume

Select

Select [Alarm Vol]: Set [Y]. Y is X~9, X is the minimum volume, and Y value plus
/ minus 1 when turning the shuttle once.
2. Key-pressing volume

Select

Select [Key Volume]: [N]. N value ranges from 0 to 9, plus / minus 1 when turning
the shuttle once, select 0 to turn off the key-pressing tone, and select 9 to set to the
maximum volume.
3. QRS volume
Select
Select [QRS Volume]: [M]. M values ranges from 0 to 9, plus / minus 1 when turning
the shuttle once, select 0 to turn off the key-pressing tone, and select 9 to set to the
maximum volume.

4.2.5 Setting Parameter Unit

You can select a preferred unit through the following operations

Select
[Menu] Smart Hotkey→[Main Menu];
Vol.Set smart hotkey → [Volume Setup] menu;
Vol.Set smart hotkey → [Volume Setup] menu;
Vol.Set smart hotkey → [Volume Setup] menu;
[Menu] Smart Hotkey→[Main Menu];
版本： 1.0
- 21 -