Table of Contents
Advertisement
文件编号：NR-TP-0715-008
Chapter2 Installation & Check
Note
To ensure normal working of the monitor, read this chapter before use, and
install as required.
Warning
All analog and digital devices connected to the monitor must be certified by IEC
standards (e.g., IEC 60950 Data Processing Equipment Standard and IEC
60601-1 Medical Equipment Standard). Furthermore, all configurations shall
comply with valid version of IEC 60601-1 standard. The personnel connecting
additional devices to the input / output signal ports are responsible for the
compliance with IEC 60601-1 standard. If there is any question, please contact
Northern.
If the patient cable interface and network interface are connected with multiple
devices, the total electric leakage cannot exceed the allowable value.
The copyright of the monitor software belongs to Northern. Without permission,
any organization or individual shall not interpolate, copy or exchange by any
means or form.
When the monitor is combined with other devices, it must comply with
IEC60601-1, and shouldn't be connected with multi-socket wire board or
extension cord.
2.1
Unpacking
Before unpacking, please check the box carefully. If any damage is found, please contact the
carrier immediately. Unpack properly, take out the monitor and accessories carefully, and
check the accessories according to the packing list. Check for any mechanical damage and if
the items are complete. If there is any question, please contact our sales department or dealer.
Note
Please keep the packing box and material for use in future transporting or
storage.
版本： 1.0
- 5 -
Advertisement
Table of Contents
