IMO Precision Controls K7 Series User Manual page 169

Chapter8 Communication Function
(Continued)
Error code Error type
H6001 Syntax error
H6010 Syntax error
H6020 Syntax error
H6030 Syntax error
H6040 Syntax error
H6050 Syntax error
Error condition and causes
* When use commands that aren' t supported.
Ex1) When use device
like %MX100 in RSB command
* OVER-RUN, FRAME error
* TIME_OUT error
* Syntax error in commands
When a FRAME text exceeds over 256 bytes.
* BCC error
8-46
Treatment
* Be familiar with the manual.
* Check if the system stopped.
* reset
* Be familiar with the manual.
* Confirm the setting of the communication
ports of RS-232C.
* reset
* Check if each sends frame has ENQ, EOT.
* Rearrange send frame not to go over 256
bytes.
* Check if BCC is right.