When Service Call Lamp Is On; [A] Contact Authorized Hoshizaki Service Company - Hoshizaki ROX-20TA-U Instruction Manual

Water electrolyzer

Hide thumbs Also See for ROX-20TA-U:

Table of Contents

Error Lamp

Error Code

3. WHEN SERVICE CALL LAMP IS ON

1. To prevent an electric shock, do not touch the Attachment Plug, Power Switch,

or other electrical parts with damp hands.

2. When abnormal situations occur, turn the Power Switch off and unplug the unit

or turn off the main power and contact an authorized Hoshizaki service company.

Continuous operation with problems may cause an electric shock or fire.

1) If the Error Lamp on the Display Panel is on, open the Door of the unit.

2) Check an error code in the Display Window. There are error codes for "Contact authorized

Hoahizaki service company immediately" and "Check by user".

Error Lamp

Service Call Lamp

* When these Error Lamps and Error Codes are on, turn off the power switch and contact an

authorized Hoshizaki service company.

(4) Is the Salt Water Filter on the end of the Salt Water Hose free

of dirt or dust?

Remove dirt and dust from the Salt Water Filter.

(5) Is the Salt Water Hose free of salt lumps, etc.?

Remove the cause that is blocking the Salt Water Hose.

(6) Are hoses connected with the outlets of the Remote

Controller?

Disconnect the hoses to maintain the balance of the

electrolytic water flow rate.

(7) Is the electrolytic water flow rate too high?

Adjust the water pressure on the primary side. Make sure

that the Pressure Reducing Valve is correctly installed.

WARNING

Error Code

E14

Defective Water Valve