Final Check List - Hoshizaki ROX-20TA-U Instruction Manual

11. FINAL CHECK LIST

1) Is the water electrolyzer level?
2) Is the water tank level?
3) Is the water electrolyzer in a site where the ambient temperature is within +40°F to +95°F
(+5°C to +35°C) and the water temperature within +40°F to +85°F (+5°C to +30°C) all
year around?
4) Is there at least 6" clearance at rear, sides and top of the water electrolyzer for maintenance
or service?
5) Is there at least 24" clearance at rear, sides and top of the water tank for maintenance or
service?
6) Have all electrical and piping connections been made?
7) Have the water softener and water filter been installed?
8) Is water from the water softener soft?
9) Are you using potable water?
10) Has the power supply voltage been checked or tested against the nameplate rating?
11) Have the water supply line shut-off valve and drain valve been installed? Has the water
supply pressure for the ROX-20TA-U been checked to ensure a minimum of 15 PSIG
(0.10MPa) and a maximum of 115 PSIG (0.78MPa)?
12) Is the water tank securely fixed?
13) Has the pressure reducing valve been installed?
14) Is the installation area well ventilated?
15) Has the operation mode been set?
16) Has the end user been given the instruction manual, and instructed on how to operate the
water electrolyzer and the importance of the recommended periodic maintenance?
17) Has the end user been given the name and telephone number of an authorized service
agent?
18) Has the warranty tag been filled out and forwarded to the factory for warranty registration?
32