Checks Before Operation; Checking Amount Of Remaining Salt Water; Making Salt Water - Hoshizaki ROX-20TA-U Instruction Manual

IV. CHECKS BEFORE OPERATION

1. CHECKING AMOUNT OF REMAINING SALT WATER

1) Check that there is enough salt water in the Salt Water Tank.
2) Add salt water following "IV. 2. MAKING SALT WATER" if there is not enough or no salt
water in the tank.

2. MAKING SALT WATER

1. Use sodium chloride salt (NaCl) or potassium chloride (KCl) with over 99%
purity. Salt other than those may damage the unit, clog pipes, etc.
2. Shake the tank until salt is completely dissolved. Salt lumps may damage the
unit.
1) Prepare the Salt Water Tank. Remove the Salt Water Hose and Cap from the Salt Water
Tank when using the Accessory Salt Water Tank. The Salt Water Tank should be empty.
Salt Water Tank
2) Add a full cup (approximately 24 oz) of sodium
chloride salt (NaCl) or potassium chloride
(KCl) of 99% purity to the Salt Water Tank.
Be sure to use the Accessory Salt Measuring
Cup.
IMPORTANT
Fig. 37
33
Cap
Salt Water Hose
Salt Water Filter
Salt Measuring Cup
Fig. 38