Operation; Start Up - Hoshizaki ROX-20TA-U Instruction Manual

Water electrolyzer
Hide thumbs Also See for ROX-20TA-U:
Table of Contents

Advertisement

4) Press the Display Select Button and hold it down.
5) The Pump starts running and pumping up the salt water to purge the Salt Water Hose. It
takes about 20 seconds to purge a 60" long hose. The sound of the Pump will change
from high to low when the air is removed.
6) Release the Display Select Button when air is purged.
V. OPERATION

1. START UP

1. Do not drink electrolytic water or allow contact in eyes or face. Use for other
than washing purpose may cause health problems. Rinse with plenty of tap
water if electrolytic water gets into eyes or face.
2. To prevent an electric shock, do not touch the Attachment Plug, Power Switch,
or other electrical parts with damp hands.
3. The Power Cord should not be modified, jerked, bound, brought close to heat
producing equipment, pressed down or pinched. It may be damaged and cause
a risk of electric shocks or fires.
4. All parts are factory-adjusted. Improper adjustment may result in failure.
5. Do not splash water directly onto the unit. It may cause a short circuit, electric
shock, corrosion or failure.
6. Install an adequate ventilating system. Hydrogen gas or chlorine gas may cause
health problems.
1. Use glass, plastic or stainless steel containers for electrolytic water. Acid water
may corrode metal.
2. Do not use combustible spray or place volatile and flammable substances near
the unit. They could catch fire from a spark of a switch or the like.
3. Do not place heavy objects or water containing vessels on the unit. They could
fall off and cause injury, or spilt water could degrade the electrical insulation
and increase the risk of electric leaks.
WARNING
CAUTION
35

Advertisement

Table of Contents
loading

Table of Contents