Hoshizaki ROX-20TA-U Instruction Manual page 35

14) When the desired mode appears in the Display Window, press the Set Button once. The
mode displayed in the Display Window will stop flashing momentarily. Check that "A6"
appears in the Display Window. See Fig. 35.
Lighting
Flashing
Press once.
15) When "A6" appears in the Display Window, hold down the Set Button. Check that "AdJ"
is displayed in the Display Window.
16) Press the Display Select Button once holding down the Set Button.
17) Check that "CHE" is displayed in the Display
Window. "CHE" indicates that the unit is in
the Check Mode. See Fig. 36.
18) Press the Display Select Button one more
time holding down the Set Button.
19) Check that "Nor." is displayed in the Display
Window.
20) Release the Set Button.
21) This is the end of setting.
Fig. 35
Off
Press once.
31
Lighting
Flashing
Fig. 36
Lighting