Parts Supplied - Fisher & Paykel DOUBLE DISHDRAWER DD60DI Installation Manual

Drain hose Drain hose
support (1) joiner (1)
Phillips 16 mm Rubber washer for inlet hose (1)
screws (9) (comes already fitted)
Panel bracket (2)
& Knock-to-Pause Module (2)
(shipped fixed to product)
Dishdrawer™ installation overview
This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only
of the installation process and is not intended to be used as a guide on how to install a DishDrawer™ yourself.
https://vimeo.com/325297597
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website.
2
Wire clip (2)
(for securing
Drain hose joiner)
Moisture protection tape (1)
(to prevent moisture damage
to cabinetry)
Panel mounting Toekick panel cutting template (1)
screws (12) (To enable a custom toekick panel to be
cut to fit the product profile dependant
on the depth of the toekick)

PARTS SUPPLIED

Clamp (1)
(for securing
Drain hose joiner)
Hexagonal socket for feet
adjustment (2)
(long & short)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
Prefinished toekick (1)
Toekick mounting bracket (1)
(A custom toekick panel of any material
with thickness 9 - 19mm can be screwed
to the Toekick mounting bracket)
Top
mounting
brackets (2)
OPTIONAL
Toekick
mounting
screws (5)
4