Tools And Components; Parts Supplied; Tools Required - Fisher & Paykel SINGLE DISHDRAWER DD60SHI9 Installation Manual

PARTS SUPPLIED

Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
z
contact the dealer or retailer you bought the product from to report the damage.
Fisher & Paykel is not responsible for shipping damage.
z
Supplied
Side mounting bracket Moisture protection
kits (2)* tape (1)
Inlet hose rubber washer Drain hose support (1)
(1)**
Wire clip (1) Clamp (1)
*Optional | **Comes fitted to the product

TOOLS AND COMPONENTS

16mm Phillips screws (16) 38mm bottom fixing
screws and washers (2)
Drain hose joiner (1) Panel bracket kits (1)**
External venting kit (1) Trim bracket*

TOOLS REQUIRED

Not supplied
Flat-blade screwdriver Powered driver
Level Pliers
INSTALL VIDEO
This video provides an overview of what is needed to install a DishDrawer™ Dishwasher. It is
intended as an overview only of the installation process and is not intended to be used as a
standalone guide on how to install a DishDrawer™ Dishwasher yourself. Installation should be
undertaken by a Fisher & Paykel trained and supported service technician or qualified person.
To access installation videos
Scan the QR code with your smartphone or watch online at:
fisherpaykel.com/dishdrawer-install
Box cutter Pencil
Phillips screwdriver
5