Fisher & Paykel DOUBLE DISHDRAWER DD60DI Installation Manual page 34

9
TALL HEIGHT INTEGRATED MODELS FOR 480 MM CAVITY ONLY - ATTACH CAVITY BRACKET
IMPORTANT!
The enclosed cavity bracket is fitted before installation in order
to conceal the gap at the top of the cavity left after installation.
1
8
MAXIMUM DISTANCE OF HOSES & CORD FROM CHASSIS EDGE
LEFT HAND SIDE
Drain hose - 2000mm
Inlet hose - 1650mm
Power cord (excl.plug) - 1650mm
Venting hose - 1525mm
Ensure the cavity panel bracket
is positioned so that the "F"
arrow is pointing towards the
front of the chassis.
RIGHT HAND SIDE
Drain hose - 1800mm
Inlet hose - 1250 mm
Power cord (excl.plug) - 1650mm
Venting hose - 1925mm
Firmly push the bracket so that
the prongs engage with the top
2 tabs and it clicks into place.
IMPORTANT!
Ensure the prongs have not
been driven down into the
chassis as this will damage
the lid below.
Ensure the top trim seal
is facing forward after
attaching the bracket.
10