Tools And Components; Parts Supplied; Tools Required - Fisher & Paykel DOUBLE DISHDRAWER DD60DHI9 Installation Manual

PARTS SUPPLIED

Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
z
contact the dealer or retailer you bought the product from to report the damage.
Fisher & Paykel is not responsible for shipping damage.
z
Supplied
Side mounting bracket Top mounting bracket
kits (2)* kit (1)*
Inlet hose rubber washer Drain hose support (1)
(1)**
Clamp (1) Hex socket (2)
Toe kick cutting Toe kick mounting
template*** (1) bracket
*Optional | **Comes fitted to the product | ***templates can also be downloaded from fisherpaykel.com

TOOLS AND COMPONENTS

Moisture protection 16mm Phillips screws (32)
tape (1)
Drain hose joiner (1) Wire clip (2)
Panel bracket kits (2)** Prefinished toe kick (1)
Toe kick screws (5)

TOOLS REQUIRED

Not supplied
Flat-blade screwdriver Powered driver
Level Pliers
INSTALL VIDEO
This video provides an overview of what is needed to install a DishDrawer™ Dishwasher. It is
intended as an overview only of the installation process and is not intended to be used as a
standalone guide on how to install a DishDrawer™ Dishwasher yourself. Installation should be
undertaken by a Fisher & Paykel trained and supported service technician or qualified person.
To access installation videos
Scan the QR code with your smartphone or watch online at:
fisherpaykel.com/dishdrawer-install
Box cutter Pencil
Phillips screwdriver
5