Advertisement
PARTS SUPPLIED
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
z
contact the dealer or retailer you bought the product from to report the damage.
Fisher & Paykel is not responsible for shipping damage.
z
Supplied
Side mounting bracket
Top mounting bracket
kits (2)*
kit (1)*
Drain hose support (1)
Pre-finished toe kick kit
(1)****
Drain hose joiner (1)
Wire clips (2)
*optional | **comes fitted to the product | ***DD60DA models only | ****DD60DC & DD60DD models only
4
TOOLS AND COMPONENTS
Moisture protection
16mm Phillips screws (9)
tape (1)
Pre-finished toe kick kit
Rubber washer (1)**
(1)***
Clamp (1)
TOOLS REQUIRED
Not supplied
Flat-blade screwdriver
Cross-head screwdriver
Level
Pliers
INSTALL VIDEO
This video provides an overview of what is needed to install a DishDrawer™ Dishwasher. It is
intended as an overview only of the installation process and is not intended to be used as a
standalone guide on how to install a DishDrawer™ Dishwasher yourself. Installation should be
undertaken by a Fisher & Paykel trained and supported service technician or qualified person.
To access installation videos
Scan the QR code with your smartphone or watch online at:
fisherpaykel.com/dishdrawer-install
Box cutter
Pencil
Powered driver
Advertisement
