Fisher & Paykel DOUBLE DISHDRAWER DD60DI Installation Manual page 41

!6 C
- ATTACH CUSTOM PANELS TO PANEL BRACKETS
2
Align bottom of each custom panel
with the bottom of each bracket.
17
!6
INSTALLING CUSTOM FRONT DRAWER PANELS
3
There must be at least
3 screws used each side.
!6 D
- ATTACH KNOCK-TO-PAUSE MODULE
TO CUSTOM PANEL
1
IMPORTANT!
Ensure the Knock-To-Pause
module is orientated correctly
before attaching.
Ensure the module is centralized
in the holes and not in contact
with the bracket.
Attach the Knock-To-Pause
module to the back of the custom
panel through the 3 holes cut into
the panel bracket as shown.
Use all 3 screws provided.
16mm (x3)
2