Fisher & Paykel DOUBLE DISHDRAWER DD60DI Installation Manual page 17

!4 C
- ATTACH CUSTOM PANELS TO PANEL BRACKETS
2
IMPORTANT!
Break off and discard the
tab at the top of the Lower
Panel Bracket.
!4
INSTALLING CUSTOM FRONT DRAWER PANELS
3
There must be at least
3 screws used each side.
Align bottom of each custom panel
2
with the bottom of each bracket.
4
!4 D
- ATTACH KNOCK-TO-PAUSE MODULES
TO CUSTOM PANELS
1
1
IMPORTANT!
Ensure the Knock-To-Pause
module is orientated correctly
before attaching.
Ensure the module is centralized
in the holes and not in contact
with the bracket.
Attach the Knock-To-Pause
module to the back of the custom
panel through the 3 holes cut into
the panel bracket as shown.
Use all 3 screws provided.
Repeat for the other module.
16mm (x3)
2
16