Fisher & Paykel DOUBLE DISHDRAWER DD60DI Installation Manual page 28

Drain hose Drain hose
support (1) joiner (1)
Phillips 38 mm
16 mm bottom fixing
screws (7) screws & metal
washers (2)
Panel bracket (1)
& Knock-to-Pause Module (1)
(shipped fixed to product)
Dishdrawer™ installation overview
This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended
to be used as a guide on how to install a DishDrawer™ yourself. https://vimeo.com/325297597
If the Drain hose supplied is not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.
2
Wire clip (1)
(for securing
Drain hose joiner)
Rubber washer
for inlet hose (1)
(comes already
fitted)
Panel mounting
screws (6)
PARTS SUPPLIED
Clamp (1)
(for securing
Drain hose joiner)
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
External Venting kit (1)
(Excludes DD60SLI9 models)
Side mounting bracket kit
(A and B) (2)
OPTIONAL
Cavity Bracket Kit (1)
(supplied with Tall
Height Models only)
Top mounting
brackets (2)
OPTIONAL
4