Polycom RMX 1500 Quick Installation And Configuration Manual page 7

Field
Signaling Host
IP Address
Media Card 1
IP Address
Subnet Mask
If Secured Communication is required on the RMX: complete the
Fast Configuration Wizard, Login, install the Certificate and then
enable the Secured Communication Mode.
2
Click Next.
3
In the Fast Configuration Wizard - Routes dialog box, enter the IP
address of the default router.
4
Click Next.
5
Enter the required DNS information in the dialog box.
Field
MCU Host Name
DNS
Description
Enter the IP address of the Central Signaling host. This is
the address used by endpoints for dialing in to the MCU.
Enter the IP address of the media card (MPMx) as
provided by the network administrator. Endpoints connect
to conferences and transmit call media (video, voice and
content) via these addresses.
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
Description
Enter the name of the MCU on the network.
Default name is RMX
Select:
•
Off – if DNS servers are not used in the network.
•
Specify – to enter the IP addresses of the DNS
servers.
Note: The IP address fields are enabled only if
Specify is selected.
7