Polycom RMX 1500 Quick Installation And Configuration Manual page 3

When the RMX is installed for the first time, you must change the
default IP addresses to your local network settings. This can be done by
modifying the default settings in the LAN Configuration Utility found on
USB key shipped with the unit and uploading them to the RMX.
1
Insert the USB key provided with your system into the PC.
The Polycom Documentation window opens.
In Windows XP:
a
The Polycom Documentation option is automatically selected.
Click OK.
In Windows 7:
a
Select Open Folder to view files using Windows Explorer.
b
Double-click the index.hta file.
The Language Menu opens.
2
Select the documentation language.
3
In the License Agreement window, click the Accept Agreement
button.
4
In the Initial Setup Utility, click the RMX Lan Configuration Utility
hyperlink.
The LanConfigUtility dialog box opens.
5
Modify the required network parameters in the utility's dialog box
using the information supplied by your network administrator.
6
Click OK.
7
Remove the USB Key from the PC.
The USB key is required for first entry power-up of the RMX.
3