Chapter 3
Mounting and Leveling the Plasma Displays
The leveling goals illustrated in
points in
aligning and leveling the Plasma displays, and make additional adjustments later if the displays have
settled.
Use the four Leveling feet on each Display structure to level the Display shelves along the X and Y axes.
Step 4
Leveling the Display shelves ensures the Display structures are level. The Display structures should be
level before attempting to level the Plasma displays.
Figure 3-4
The surface of the Display shelves should not obstruct any lines of resolution. Use the Plasma display
Step 5
Leveling feet to raise or lower the Plasma displays and make sure all lines of resolution can be seen when
sitting at both the first and second conference tables.
OL-14521-01
Figure 3-4
Figure
3-3. You may need to perform any or all of the illustrated goals several times while
Level the Display shelves along the X and Y axes
Purpose of Leveling the Plasma displays
through
Figure 3-8
show how to use the leveling alignment
Cisco TelePresence System 3200
3-5