Chapter 5 Building The Lighting Assembly; Parts List - Cisco 3200 Use And Care Manual

Parts List

Key Part Description
23
Light "cup" bracket
24
5-foot center light fixture
25 4-foot side light fixture
26 M8 x 70 mm screws
27 M8 x 16 mm pan head screw, white
28
M8 x 20 mm flat head screw, white
29 Diffuser Panel braces / H-clips
30 Compliance sticker for plasma display
31 M8 x 16 mm pan head screw, black
32
Reflector bottom tray: right side top
33 Reflector bottom: right end
Touch-up paint, white
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Metal and plastic edges can be sharp. Cisco recommends you wear safety gloves and safety glasses when
Caution
attaching the lighting assembly.
Caution Some system components have metal and plastic edges with hard angles. These edges are exposed until
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
The directions left and right refer to the assembly as you face the Plasma displays.
Note
Cisco TelePresence System 3200
5-2
Part Number Qty Ctn Notes
700-23737-xx 2
74-5361-xx 3
CTS-LT-FX-
5FT-GN
Kit #95-8932-xx
74-5362-xx 2
CTS-LT-FX-
5FT-GN
Kit #95-8932-xx
48-2274-xx 10
48-2432-xx
48-2433-xx 10
700-25050-xx 2
47-21525-xx 1
48-2430-xx 2
700-27762-xx 1
700-27763-xx 1
74-5247-xx 1
Chapter 5 Building the Lighting Assembly
43
31 See "Appendix B: Region- and
Country-Specific Equipment"
Europe- and Japan-specific lighting
fixtures.
30, See "Appendix B: Region- and
31 Country-Specific Equipment"
Europe- and Japan-specific lighting
fixtures.
1
1
49
49
1
1
49
49
1 Use this paint on the light reflectors to fix
any minor cosmetic issues caused by
shipping and handling.
for
for
OL-14521-01