Chapter 9
Routing Power and Signal Cables
Step 5
Route the extension cables for the Cisco Unified IP Phone, first row microphones, and (if required)
Ethernet connections in the first row table; then, connect the microphone cables to the microphones.
Tip
Use the cable gutters in the privacy panels to route the cables.
Using masking tape or another method, note the microphone cables as they correspond to the
Note
microphones. You use this information when you connect the microphone cables to the audio/video
extension unit in
Figure 9-5
Table assembly Signal Cable Routing
5
5
4
3
Route the Table Leg Signal cables behind the Display structure, along with the other signal cables, but
Note
do not plug them into any Codec.
OL-14521-01
Step
17.
Table Leg Signal
IP Phone Signal
Microphone Signal
Projector Signal
VGA Peripheral
Power Requirements for the Cisco TelePresence 3200
Cisco TelePresence System 3200
9-7