Cisco 3200 Use And Care Manual page 103

Chapter 7 Building the Second Row Table Assembly
Figure 7-11
43
44
Step 12 Assemble the I/O modules for the inner molded foam bumpers.
The Ethernet cables are of different lengths. Attach the Ethernet cables to the I/O modules as follows:
Note
Use the 12M cable, 37-0965-01, for the I/O modules between sections 6 and 5
•
Use the 3M cable, 37-0887-02, for the I/O modules between sections 5 and 7
•
Steps for routing the Ethernet and power cables are in
Note
The flange on the I/O module cover piece is wider on the bottom than on the top.
Note
OL-14521-01
Foam Bumper Assembly
46
50
45
47 48 49
Chapter 9, "Routing Power and Signal Cables."
Cisco TelePresence System 3200
Parts List
7-15