Cisco 3200 Use And Care Manual page 195

Chapter 10 First-Time Setup
Figure 10-8 Arranging the Small and Large Targets
In the Cisco TelePresence Administrative GUI, click Setup, then click Show Focus Target.
Step 3
Adjust the small target so that the red box encloses the upper patterns on the large target and the green
Step 4
box encloses the patterns on the small target.
Figure 10-9 Positioning the Small and Large Targets
Large
target
Small
target
Red and green
horizontal bars
Adjust the focus on the camera by performing the following steps:
Step 5
a.
OL-14521-01
Large target
Loosen the thumbscrew for the lens focus ring. The ring is labeled "N-8".
5 ft
Small target
Setting Up CTS Components
10 ft
Red
rectangle
Green
rectangle
Cisco TelePresence System 3200
10-13