Saving And Getting System Settings; Restoring The Works Settings - Honeywell HCM 200 Manual

Press the Dial button.
►
The module is removed from
the list.
The shutter module is de-installed.

Saving and getting system settings

Why save settings?
Always save your settings after you have carried out changes.
This ensures that settings are not lost, even when power fails or
when batteries are flat.
For information on how to save and get the system settings
please refer to the operating instructions of Hometronic Manager
in the "Adapting" chapter.

Restoring the works settings

If you restore the works settings*, all the current adjustments and
assignments such as module names, time programs and Life-
styles* are lost.
In order to use the current configuration later again you have to
save the settings beforehand.
Change to the "Settings" submenu as described in the operat-
►
ing instructions of the Hometronic Manager.
Select "Configuration".
►
" Select "Factory setup".
►
The following text is displayed:
Press the Dial button.
►
Assigning modules and rooms
MODULE-2
Factory Setup
Actual configuration will
be deleted!
NO YES
Technical Data
*
21