Table of Contents
Advertisement
Important Safety
Information
Read this document carefully before installing or operating the
CP2308-C. Store the document in a location close to the
CP2308-C for future reference.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this
product to rain or moisture.
Do not alter the power plug, overload the power
outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to
service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to
service the product.
Notation
Learn the hazard and information symbols used in the product
documentation.
Danger messages indicate a hazardous situation
which, if not avoided, results in death or serious
injury.
Warning messages indicate a hazardous situation
which, if not avoided, could result in death or
serious injury.
Caution messages indicate a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
Notice messages indicate a hazardous situation
which, if not avoided, may result in equipment or
property damage.
Information messages provide additional
information, emphasize or provide a useful tip.
Product labels
Learn about the labels that may be used on the product. Labels
on your product may be yellow or black and white.
CP2308-C Product Safety Guide
020-102493-01 Rev. 1 (12-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
General hazards
General hazard.
Electric shock hazard. To avoid personal injury,
disconnect all power sources before performing
maintenance or service.
Electrocution hazard. To avoid personal injury,
always disconnect all power sources before
performing maintenance or service procedures.
Fire hazard. To avoid personal injury and property
damage, follow the instructions provided in this
document.
Hot surface hazard. To avoid personal injury, allow
the product to cool for the recommended cool down
time before performing maintenance or service.
Burn hazard. To avoid personal injury, allow the
product to cool for the recommended cool down
time before performing maintenance or service.
Explosive material hazard. To avoid personal injury,
disconnect all power sources before performing
maintenance or service, and wear Christie-approved
protective clothing.
Bright light hazard. To avoid personal injury, never
look directly at the light source.
Pinch hazard. To avoid personal injury, keep hands
clear and loose clothing tied back.
Fan hazard. To avoid personal injury, keep hands
clear and loose clothing tied back. Always
disconnect all power sources before performing
maintenance or service procedures.
Voltage hazard. To avoid personal injury, always
disconnect all power sources before performing
maintenance or service procedures.
Do not operate the product at an altitude exceeding
2000 m.
Not for household use.
2
Advertisement
Table of Contents
