Table of Contents
Advertisement
•
FIRE HAZARD! Keep hands, clothes, and all
combustible material away from the
concentrated light beam of the lamp.
Caution! Failure to comply with the following could
result in minor or moderate injury.
•
Improper installation of the lamp can damage
the projector.
•
Incorrect lamp power supply and igniter
connections can damage the product.
Light intensity hazard
This projector has been classified as Risk Group 3 as per the
IEC62471 standard due to possible hazardous optical and
thermal radiation being emitted.
Warning! Failure to comply with the following could
result in serious injury.
•
PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct
exposure to the beam must be permitted.
•
PERMANENT/TEMPORARY BLINDNESS HAZARD!
Operators must control access to the beam within the
hazard distance or install the product at the height
(greater than or equal to 2.0 m from the floor to the
beam) that prevents exposure of spectators' eyes within
the hazard distance.
•
EXTREME BRIGHTNESS! Do not place reflective objects in
the product light path.
AC power precautions
Learn the safety precautions related to AC power.
Warning! Failure to comply with the following could
result in death or serious injury.
•
SHOCK HAZARD! A dedicated, protected ground
or earth wire must be installed on the product
by Christie qualified technicians or electricians
before it can be connected to power.
•
SHOCK HAZARD! Only use the AC power cord
provided with the product or recommended by
Christie.
•
FIRE AND SHOCK HAZARD! Do not attempt
operation unless the power cord, power socket,
and power plug meet the appropriate local
rating standards.
•
SHOCK HAZARD! The AC power cord must be
inserted into an outlet with grounding.
•
SHOCK HAZARD! Do not attempt operation if
the AC supply is not within the specified voltage
and power range, as specified on the license
label.
•
SHOCK HAZARD! Disconnect the product from
AC before moving, servicing, cleaning, removing
components, or opening any enclosure.
•
The appliance coupler and main power supply
plug must be easily accessible for disconnecting
the product from the power source.
CP2308-C Product Safety Guide
020-102493-01 Rev. 1 (12-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Caution! Failure to comply with the following could
result in minor or moderate injury.
•
Only Christie qualified technicians are permitted
to open product enclosures.
•
Install the product near an easily accessible AC
receptacle.
•
For products containing surge suppressors, you
must adhere to the installation and power
requirements.
Installation and Power Requirements
The protected earth wire must be green/yellow 12 AWG
minimum.
You must use a 20A branch circuit breaker for Input A.
Power specifications
Learn the power requirements for the projector.
AC input (A)
Item
Voltage range
Line frequency
Inrush current
Current consumption
Power consumption
Current rating of AC input
UPS AC input (B)
Item
Activation
UPS inlet connector
(rating for powering main
electronics)
UPS type
Line frequency
Current consumption
Technical support
•
North and South America: +1-800-221-8025 or
Support.Americas@christiedigital.com
•
Europe, Middle East, and Africa: +44 (0) 1189 778111 or
Support.EMEA@christiedigital.com
•
Asia Pacific: +65 6877-8737 or
Support.APAC@christiedigital.com
•
Christie Managed Services: +1-800-550-3061 or
NOC@christiedigital.com
Important Safety Information
Description
200 - 240 VAC
50/60 Hz nominal
100 A (at 240 VAC)
16 A maximum (at 200 VAC)
3200 W maximum
IEC-320-C19/20 A
Description
Discrete switch above the
power inlet cord(s)
IEC-320-C13/10 A, 240 VAC
Universal 100-240 VAC
50/60 Hz nominal
4 A maximum (at 100 VAC)
4
Advertisement
Table of Contents
