Cisco Ip/Tv 3426 Broadcast Server - Cisco IP/TV 3400 Series User Manual

Cisco IP/TV Broadcast Servers

Cisco IP/TV 3426 Broadcast Server

Cisco IP/TV 3400 Series Servers User Guide
1-10
Figure 1-4 Cisco IP/TV 3425 and 3425A Broadcast Server Audio and Video
Connectors
S-Video
S-video
input
The Cisco IP/TV 3426 Broadcast Server captures real-time and prerecorded
content and streams it over the network using high-quality MPEG-4 compression
techniques for the highest-quality streaming. The Cisco IP/TV 3426 Broadcast
Server delivers one high-resolution MPEG-4 stream or four low-resolution,
low-bit rate streams (audio or QCIF resolution).
The Cisco IP/TV 3426 Broadcast Server is configured for AC-input power and has
a single AC-input power supply. It has an integrated dual-port Ethernet controller
that provides an interface for connecting to 10-Mbps, 100-Mbps, or 1000-Mbps
networks.
The Cisco IP/TV 3426 Broadcast Server has two 10BASE-T/100BASE-TX/
1000BASE-TX Ethernet ports with RJ-45 receptacles. Both Ethernet ports
support autodetect speed mode and full-duplex operation, which enable
simultaneous transmission and reception of data on the Ethernet LAN.
The Cisco IP/TV 3426 Broadcast Server is configured with a Winnov Videum
4400 AV 4-port video capture card that supports medium- and low-quality H.261
and MPEG-4. The video capture card is user-replaceable and is installed in PCI-X
slot 1, labeled PCI 1 on the back panel.
Table A-2 on page A-3
Broadcast Server.
Comp V Out
Composite Video
video output
input
lists the hardware specifications for the Cisco IP/TV 3426
Chapter 1 Introducing IP/TV Servers
A Out A In
Audio Audio
output input
OL-4467-01