Led Indicators - Cisco IP/TV 3400 Series User Manual

Chapter 1 Introducing IP/TV Servers
Table 1-10 Cisco IP/TV 3427 Broadcast Server Front Panel Control Buttons
Item
2 Power control button
3
Reset button
9 CD eject button

LED Indicators

Table 1-11 Cisco IP/TV 3427 Broadcast Server Front Panel LEDs
LED
1 Power on
4 SCSI or IDE bus
activity
5 System identification
6 Information
7 System error
8 CD-ROM drive activity Green
OL-4467-01
Description
Turns on IP/TV Server. To power down IP/TV Server, you might need
to press the power button for a few seconds.
Reboots IP/TV Server. You might need to use a pen or the end of a
straightened paper clip to press the button.
This is a hardware reset button and does not restore the device
Note
to the factory default software settings.
Releases a CD from the drive. The CD-ROM drive is used for
software upgrades and disaster recovery.
Table 1-11 describes the Cisco IP/TV 3427 Broadcast Server front panel LEDs
and their functions.
Color State
Green On
Flashing
Green On
Blue Off
Amber On
Amber On
On
Cisco IP/TV Broadcast Servers
Description
Indicates that power is flowing to IP/TV
Server.
Indicates that IP/TV Server is in
standby mode.
Indicates that there is activity on the SCSI or
IDE bus.
This LED is not used in IP/TV Server.
Indicates that the information log contains
information about certain conditions in
IP/TV Server that might affect performance.
Indicates that a system error has occurred. An
LED on the diagnostic LED panel will also be
on to further isolate the error.
Indicates that the CD-ROM drive is in use.
Cisco IP/TV 3400 Series Servers User Guide
1-19