Cisco IP/TV 3400 Series User Manual page 94

Connecting Cables to Video Capture Cards
For more details on the contents of the IP/TV Server accessory kit, see the
Accessory Kits" section on page
contact your place of purchase.
To connect the Winnov Videum 4400 AV video capture card to video and audio
sources, follow these steps:
Plug a BNC connector cable into the first channel (labeled 2 in
Step 1
the capture card.
Figure 3-24 Winnov Videum 4400 AV Video Capture Card—Connecting to the
1
Connect the other end of the cable to the video source that you want to use for this
Step 2
channel.
Plug the 4-channel audio connector cable into the audio port (labeled 1 in
Step 3
Figure
Locate the connector marked Channel 1 at the other end of the cable, and connect
Step 4
it to the audio cable from the video source connected to Channel 1 on the video
capture card.
Repeat
Step 5
capture card.
Cisco IP/TV 3400 Series Servers User Guide
3-32
Video Source
1
Audio in port
3-24) on the video capture card.
Step 1, Step 2, and
Chapter 3
1-24. If any items are missing or damaged,
2
2
Video in ports
Step 4 to connect the other video sources to the video
Installing the IP/TV Server
"Server
Figure 3-24) on
OL-4467-01