Connecting Power And Booting The System - Cisco IP/TV 3400 Series User Manual

Installing Cisco IP/TV 3426 Broadcast Server Units
Figure 3-15 IP/TV 3426 Broadcast Server Back Panel Ports and Receptacles
1
9
1
AC power receptacle
3 Serial port
5 Ethernet 1 receptacle
7
Mouse port
9 PCI 2; SCSI adapter and port

Connecting Power and Booting the System

Step 1
Step 2
Step 3
Step 4
Cisco IP/TV 3400 Series Servers User Guide
3-18
2
8
To connect power to your system, follow these steps:
Review the information in the
Plug the power cord into the power cord receptacle on the back of the IP/TV
Server. (See Figure 3-15.)
Connect the other end of the power cord to a power source at your installation site.
Power up all externally connected devices.
7 6 5
2
Winnov Videum 4400 video capture card
4 Ethernet 2 receptacle
6 Onboard video port
8
Keyboard port
"Safety Warnings" section on page
Chapter 3 Installing the IP/TV Server
4 3
2-2.
OL-4467-01