Attaching The Mounting Brackets - Cisco IP/TV 3400 Series User Manual

Installing Cisco IP/TV 3425 and 3425A Server Units

Attaching the Mounting Brackets

Cisco IP/TV 3400 Series Servers User Guide
3-4
One monitor cable
•
• Documentation
The chassis mounts to two rack posts with brackets that attach to the front, mid,
or rear sides of the chassis. The brackets for 19-inch (48.26-cm) and 23-inch
(58.42-cm) racks are the same; however, they are mounted differently on the
chassis. (See Figure 3-1.) Brackets for a 19-inch (48.26-cm) equipment rack
require four rack screws in each bracket, and brackets for a 23-inch (58.42-cm)
equipment rack require two screws in each bracket.
Figure 3-1 Rack-Mount Brackets
Orientation for 19-inch rack
Figure 3-2, Figure 3-3, and
on the chassis. The brackets are oriented for a 19-inch (48.26-cm) equipment rack.
Figure 3-2 Bracket Position for Front Mount
C o n te n
t E n g in
e 5 9 0
DR IV E 1
Front
Chapter 3
Orientation for 23- or 24-inch rack
Figure 3-4 show the three bracket mounting positions
Installing the IP/TV Server
Rear
OL-4467-01