Cisco IP/TV 3400 Series User Manual page 75

Chapter 3 Installing the IP/TV Server
Figure 3-11 Removing the Inner Slide Rail
1
3
Place an inner slide rail at the alignment marker (labeled 1 in
Step 3
indicated by the arrow on the side of the IP/TV Server. Use two M4 screws to
secure the inner slide rail to the IP/TV Server.
Repeat this step to attach the other inner slide rail to the IP/TV Server.
OL-4467-01
1
Slide rail assembly
Inner slide rail
Installing Cisco IP/TV 3426 Broadcast Server Units
2 Release latch
Cisco IP/TV 3400 Series Servers User Guide
3
2
Figure 3-12) as
3-13