Winnov Videum 1010 Plus Video Capture Card - Cisco IP/TV 3400 Series User Manual

Chapter 3 Installing the IP/TV Server

Winnov Videum 1010 Plus Video Capture Card

Step 1
OL-4467-01
The Winnov Videum 1010 Plus video capture card has one audio and one video
capture channel.
The IP/TV Server accessory kit contains the following cables for connecting the
IP/TV Server to audio and video sources:
MXC-to-composite and S-video adapter cable
•
RCA male-to-male cable
•
For more details on the contents of the IP/TV Server accessory kit, see the
Accessory Kits" section on page
contact your place of purchase.
To connect the Winnov Videum 1010 Plus video capture card to video and audio
sources, follow these steps:
Plug the MXC-to-composite and S-video adapter cable into the MXC video port
on the video capture card. (See
Figure 3-25 Winnov Videum 1010 Plus Video Capture Card—Connecting the
Video Source
1
2
3
4
1
MXC video port
3
Line/Mic audio in port
Connecting Cables to Video Capture Cards
1-24. If any items are missing or damaged,
Figure 3-25.)
2
Auxiliary audio in port
4
Audio out port
Cisco IP/TV 3400 Series Servers User Guide
"Server
3-33