Chapter 4 Setting Ip/Tv Server Configuration Parameters; Setting Date, Time, And Time Zone - Cisco IP/TV 3400 Series User Manual

Setting Date, Time, and Time Zone

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
OL-4467-01
Setting IP/TV Server Configuration
Parameters
This chapter describes how to set selected IP/TV Server configuration parameters,
and includes the following sections:
• Setting Date, Time, and Time Zone, page 4-1
Setting the TCP/IP Network Configuration, page 4-2
•
Setting the date, time, and time zone for each IP/TV Server is required for proper
synchronization between IP/TV Servers and IP/TV Viewers. If you do not set
these elements properly, scheduled programs may not run at the correct time.
To set the date, time, and time zone, follow these steps on each IP/TV Server:
Choose Start > Settings > Control Panel.
Double-click the Date/Time icon.
On the Date/Time tab, enter the correct date and time.
Click the Time Zone tab.
Choose your time zone.
Click OK.
C H A P T E R
Cisco IP/TV 3400 Series Servers User Guide
4
4-1