Gain Adjust X; Invert Enable X; Preset Control; Saving Presets - evertz 7700 MultiFrame Manual

7700/7800 MultiFrame Manual
7800IDA8-3G 3G/HD/SD-SDI Intelligent Distribution Amplifier (1x8)

6.5.2. Gain Adjust X

The Gain Adjust X/Y control enables the user to set the value of the gain for the selected source. The
user can adjust the gain of the selected source by moving the associate slider control left to decrease the
value or right to increase the value. The value range for the gain adjustments is -24 dB to +24 dB. Gain is
incremented or decremented in 0.1 dB steps.

6.5.3. Invert Enable X

The Invert Enable X enables the user to invert the phase or pass the selected audio channel.
Normal
Invert
6.6.

PRESET CONTROL

The Preset Control tab allows the saving and recalling of presets.

6.6.1. Saving Presets

The Save Preset drop down menu will save the current module settings to a selected preset number. The
user can save the settings by assigning a preset number (i.e. Preset 02), which can later be recalled using
the load parameter.
01-10
CANCEL

6.6.2. Loading Presets

The Load Preset drop down menu will load the settings saved in the preset to the current module
settings. The user can recall and load a saved preset by selecting the desired preset number (i.e. Preset
02).
FACT
01-10
Cancel
Page - 14
Passes the audio channel through with no processing.
Inverts the phase of the audio channel.
Selects the preset to save the current module settings to.
Cancels the selection.
Loads the factory default settings into the module.
Selects the preset from which to load settings from.
Cancels the selection.
Revision 1.2