Mixer Control (+Umx, +Ig And +Dmx Versions Only); Source X/Y; Figure 6-4: Mixer Control 1-4 Tab - evertz 7700 MultiFrame Manual

7700/7800 MultiFrame Manual
7800IDA8-3G 3G/HD/SD-SDI Intelligent Distribution Amplifier (1x8)
6.5.

MIXER CONTROL (+UMX, +IG AND +DMX VERSIONS ONLY)

The Mixer Control tabs control the output audio. There are 16 individual channel mixers to control. These
Output Channel mixers perform audio inversion, audio gain adjustment and audio channel swapping for
each of the 16 output audio channels. Using the X and Y inputs of each Output Channel Mixer an
additional level of mono-mixing is also available for each channel of output audio.
For the sake of brevity, only the Mixer Control Ch1-4 control tab will be discussed in this manual. Control
tabs for Mixer Control Ch5-8, Mixer Control Ch9-12 and Mixer Control Ch13-16 are identical in their
operation. Furthermore, the controls for Channel 1 will be described in detail, as the controls for Channel
2, Channel 3 and Channel 4 operate in an identical fashion.

Figure 6-4: Mixer Control 1-4 Tab

6.5.1. Source X/Y

The Source X/Y control enables the user to route one of the 16 internally processed input audio channels
to the X/Y input of the Channel 1 mixer. The user can select the channel source by selecting the desired
channel from the Source X/Y drop down menu as shown in Figure 6-5.
Page - 12
Revision 1.2