7700/7800 MultiFrame Manual
7800IDA8-3G 3G/HD/SD-SDI Intelligent Distribution Amplifier (1x8)
5.4.
PRESET PARAMETERS
The PRST menu option enters into a selection menu to either recall or save a preset.
SAVE
LOAD
5.4.1. Saving Presets
The SAVE parameter will save the current module settings to a selected preset number. The user can
save the settings by assigning a preset number (i.e. Preset 02), which can later be recalled using the load
parameter.
01-10
5.4.2. Loading Presets
The LOAD parameter will load the settings saved in the preset to the current module settings. The user
can recall and load a saved preset by selecting the desired preset number (i.e. Preset 02).
FACT
01-10
5.5.
VIDEO PARAMETERS
The VID menu option enters into a selection menu to view the current video standard or set a forced video
standard.
SELV
DETV
5.5.1. Forcing a Video Standard
The SELV parameter will force the module into operating with a specific video standard. It is
recommended to leave this setting in AUTO mode.
5.5.2. Viewing the Input Video Standard
The DETV parameter will display the currently detected input video standard. It will display one of the
standard listed in section 5.5.1 if present, otherwise it will display NONE.
Page - 8
Menu option to save current module state to a selected preset.
Menu option to load to the module a selected preset.
Selects the preset to save the current module settings to.
Loads the factory default settings into the module.
Selects the preset from which to load settings from.
Menu option to select a forced video standard
Menu option to view the current detected video standard
AUTO
270M
1.5G
3G A
3G B
Revision 1.2