Card Edge Module Control; Card-Edge Control; Navigating The Card-Edge; Card-Edge Menu Structure - evertz 7700 MultiFrame Manual

5.

CARD EDGE MODULE CONTROL

5.1.

CARD-EDGE CONTROL

The 7800IDA8-3G is equipped with a push-button shaft encoder and a four character dot matrix display to
control various functions on the card. The push-button shaft encoder is used to navigate through a menu
system to set and monitor various parameters for the module. When not in the menu system the four
character dot matrix display rotates through the module name, firmware version and IP address.

5.1.1. Navigating the Card-Edge

You can use the push-button shaft encoder to move up and down the list of available parameters to
adjust. To adjust any parameter, use the shaft encoder to move up or down to the desired parameter and
then press the shaft encoder in.
rotate the shaft encoder clockwise and decrease if you rotate the shaft encoder counter-clockwise. If the
parameter contains a list of options, you can cycle through the list by rotating the shaft encoder in either
direction. The parameter values are changed as you cycle through the list.
When you have stopped at the desired value, depress the shaft encoder. This will return you to the
parameter, select the menu item that you are setting (the display shows the parameter name you were
setting). To change another parameter, rotate the shaft encoder to select other parameters. If neither the
toggle switch nor pushbutton is operated for several seconds the card edge control will exit the menu
system and return to an idle state.
Throughout the descriptions of the Menu items, default values are shown with bolded text.
5.2.

CARD-EDGE MENU STRUCTURE

The following is a brief description of the top level of the menu tree that appears when you enter the ON
screen menu. Selecting one of these items will take you down into the next menu level to set the value of
that parameter.
DPSL
PRST
VID
QUIT
5.3.

SETTING THE DISPLAY ORIENTATION

The DSPL parameter controls the display orientation of the four digit LED display.
HORZ
VERT
7800IDA8-3G 3G/HD/SD-SDI Intelligent Distribution Amplifier (1x8)
If the parameter is a numerical value, the number will increase if you
Sets the orientation of the four-digit LED display
Allows the saving or recalling of presets
Displays or sets the operating video standard
Exits the menu
The display will be shown horizontally (ideal when installed in a 1RU or
standalone frame).
The display will be shown vertically (ideal when installed in a 3RU frame).
Revision 1.2
7700/7800 MultiFrame Manual
Page - 7