Vistalink ® Module Control; What Is Vista Link - evertz 7700 MultiFrame Manual

6. VISTALINK
This section describes the VistaLINK
illustration purposes, the +UMX+IG option is shown. Special mention will be noted in the title if that section
applies only to specific option versions of the module (i.e. +UMX only).
VISTA
6.1. WHAT IS
VistaLINK is Evertz's remote monitoring and configuration platform which operates over an Ethernet
®
network using Simple Network Management Protocol (SNMP). SNMP is a standard computer network
protocol that enables different devices sharing the same network to communicate with each other.
VistaLINK provides centralized alarm management, which monitors, reports, and logs all incoming alarm
®
events and dispatches alerts to all the VLPro Clients connected to the server. Card configuration through
VistaLINK PRO can be performed on an individual or multi-card basis using simple copy and paste
®
routines, which reduces the time to configure each module separately. Finally, VistaLINK
user to configure devices in the network from a central station and receive feedback that the configuration
has been carried out.
There are 3 components of SNMP:
1. An SNMP manager also known as a Network Management System (NMS) is a computer running
special software that communicates with the devices in the network. Evertz VistaLINK
graphical user interface (GUI), third party or custom manager software may be used to monitor and
control Evertz VistaLINK
2. Managed devices, each with a unique address (OID), communicate with the NMS through an SNMP
Agent. Evertz VistaLINK
and communicate with the manager via the 7700FC VistaLINK
as the Agent.
3. A virtual database known as the Management Information Base (MIB) lists all the variables being
monitored, which both the Manager and Agent understand.
information about obtaining a copy of the MIB for interfacing to a third party Manager/NMS.
For more information on connecting and configuring the VistaLINK
Controller chapter.
7800IDA8-3G 3G/HD/SD-SDI Intelligent Distribution Amplifier (1x8)
MODULE CONTROL
®
control and monitoring available on the 7800IDA8-3G. For
®
LINK ?
®
enabled products.
®
enabled 7700/7800 series modules reside in the 3RU 7800FR MultiFrame
®
7700/7800 MultiFrame Manual
frame controller module, which serves
®
Revision 1.2
®
Please contact Evertz for further
network, see the 7700FC Frame
®
enables the
®
Pro Manager
Page - 9