Safety Recommendations - Cisco FPR1150-ASA-K9 Hardware Installation Manual

Installation Preparation
Warning
Warning
Warning
Warning
Warning
Warning

Safety Recommendations

Observe these safety guidelines:
• Keep the area clear and dust free before, during, and after installation.
• Keep tools away from walkways, where you and others might trip over them.
Statement 1030 Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1040 Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1045 Short-Circuit Protection
This product requires short-circuit (overcurrent) protection to be provided as part of the building
installation. Install only in accordance with national and local wiring regulations.
Statement 1051 Laser Radiation
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams
or view directly with optical instruments.
Statement 1055 Class 1/1M Laser
Invisible laser radiation is present. Do not expose to users of telescopic optics. This applies to Class
1/1M laser products.
Statement 1074 Comply with Local and National Electrical Codes
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
Cisco Firepower 1100 Series Hardware Installation Guide
Safety Recommendations
21