Table 1-12 Trunk Status Information - NEC NEAX 2000 IVS2 Maintenance Manual

CHAPTER 1 MAINTENANCE SERVICE FEATURES
Diagnostics
Table 1-11 Station Status Information (Continued)
STATUS
CODE
C4 In a CAT mode (For D
C8 In a UCD Queue
C9 In a UCD Queue after holding a station
CA In a UCD Queue after holding a trunk
NOTE: The status codes not described in "Station Status Information" mean busy conditions.
(2) Trunk Status Information
Operation:
F50
0 + DXXX
(TRUNK NO.)
For the meaning of status code, see
STATUS
CODE
01 Incoming queue to Attendant Console
03 Attendant Camp On
04 In a trunk to station connection
05 Dialing In (Tie Line)
06 In a tandem connection
08 Hold by Exclusive/Nonexclusive Hold
09 TAS in progress
Page 38
DESCRIPTION
term
)
ST COMMAND=
DE F50>
+
DE XXXX : XX XX XX XX
+

Table 1-12 Trunk Status Information

DESCRIPTION
STATUS CODE OF THE DESIGNATED ADDRESS +3
STATUS CODE OF THE DESIGNATED ADDRESS +2
STATUS CODE OF THE DESIGNATED ADDRESS +1
STATUS CODE OF THE DESIGNATED ADDRESS
DESIGNATED ADDRESS
Table 1-12.
REMARKS
REMARKS
2
NEAX2000 IVS Maintenance Manual
ND-70926 (E), Issue 3.0