Battery Release Control; General Description; Service Conditions; Programming Procedure - NEC NEAX 2000 IVS2 Maintenance Manual

CHAPTER 1 MAINTENANCE SERVICE FEATURES

Battery Release Control

BATTERY RELEASE CONTROL

General Description

When the AC power is to be cut off intentionally (such as maintenance for the building), this
feature can disconnect the batteries from the PBX, using the MAT or the CAT, and prevent an
excessive discharge of the battery.

Figure 1-1 System Diagram of Battery Release Control

PBX
C.O.
PWR
MODEM
NETWORK
MAT
ENTERING COMMAND
BATTERY
MODEM
MP
BATTERY CONNECTION RELAY

Service Conditions

The battery disconnection is cancelled if the system is initialized (Power OFF/ON or Reset).

Programming Procedure

No programming is required.
2
NEAX2000 IVS Maintenance Manual
Page 31
ND-70926 (E), Issue 3.0