Service Conditions - NEC NEAX 2000 IVS2 Maintenance Manual

CHAPTER 1 MAINTENANCE SERVICE FEATURES
Remote MAT

Service Conditions

(1) Remote MAT can manage NEAX IMX, NEAX IVS
specified software version. Actual product names with software version by countries are as
follows:
NEAX2000 NEAX7400 IMX
IMX
NEAX2000
NEAX2000 IVS
2
IVS / [Series 2000 (R1.5 or
M100MX later)]
NEAX2000 NEAX7400 ICS M120
IVS/ NEAX7400 ICS M110
M100 (3300 series or later)
(2) Remote MAT can manage up to 1000 remote offices.
Note that the maximum number of NEAX2000 IVS/M100 systems to be managed by the
Remote MAT is varied depending on the software version.
Australia
3400 series or earlier
3500 series or later
(3) Remote MAT and MATWorX must be installed in the same PC.
(4) Remote MAT is connected to the PBX over PSTN line or tie line via modem.
The modem for Remote MAT must be compatible with an internal modem of the PBX.
(5) When automatic notification of fault information by e-mail is used, the PC for Remote MAT
must be connected to Local Area Network (LAN).
(6) Health check of remote maintenance lines is not available for NEAX2000 IVS/M100.
(7) MJ Alarm, MN alarm, and -- alarm, which are set as the objects of fault information stored
by CMEA Y=2, can be reported to the Remote MAT.
(8) Until a new fault occurs, fault information is not reported even though the previous fault
information has not been read, by the Remote MAT.
Page 52
Australia
NEAX2000
2
INTEGRATED VOICE
SERVER (R2.1 or later)
UK
N/A
N/A
2
/M100MX, and NEAX IVS/M100 with
UK
N/A NEAX7400 ICS (IMX)
NEAX7400 ICS M100MX
(R2.1 or later)
N/A NEAX7400 ICS M100
NEAX7400 ICS M80VS
(GD version or later)
Other Countries
GD version or earlier
J version or later
NEAX2000 IVS
Other Countries
Maximum of 60 offices
Maximum of 540 offices
2
Maintenance Manual
ND-70926 (E), Issue 3.0