Security - Nexcom eLITE610 User Manual

Chapter 4: BIOS Setup
Miscellaneous Configuration
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Main Chipset Boot
Miscellaneous Configuration
High Precision Timer [Enable]
State After G3 [S0 State]
Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc.
High Precision Timer
Enables or disables high precision event timer.
State After G3
Configures the power state when power is re-applied after a power failure
(G3 state).
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit

Security

Enable or Disable the High
Precision Event Timer
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Security
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced Chipset
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length
Maximum length
Administrator Password
User Password
Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc.
Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
50
Security Boot Save & Exit
Set Administrator Password
3
20
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
eLITE610 User Manual