Security - Nexcom TPPC 2401 User Manual

Chapter 4: BIOS Setup
USB Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
xHCI Mode [Enable]
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
xHCI Mode
Enables or disables XHCI mode. When enabled, XHCI controller would be
disabled and none of the USB devices are detectable and usable during boot
and in OS. Do not disable it unless for debugging purposes.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.

Security

Once enabled, XHCI controller
would be function disabled,
none of the USB devices are
detectable and usable during
boot and in OS. Do not disable
it unless for debug purpose.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Setup Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
47
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Setup Administrator Password
User Password
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Boot Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
TPPC 2401/2701/3201 User Manual