Advanced - Nexcom eLITE610 User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced Chipset
Trusted Computing
ACPI Settings
F81216SEC Super IO Configuration
IT8528 H/W Monitor
CPU Configuration
Network Stack Configuration
USB Configuration
Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Security Boot Save & Exit
Trusted Computing Settings
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Configuration
Security Device Support
NO Security Device Found
Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc.
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
39
Enables or Disables BIOS
support for security device.
[Enable]
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
eLITE610 User Manual