Chapter 3: System Setup
C
3: s
haPter
ystem
Removing the Rear Chassis Cover
Prior to removing the chassis cover, make sure the unit's power
CAUTION!
CAUTION!
CAUTION!
is off and disconnected from the power sources to prevent
electric shock or system damage.
1. Locate and remove the mounting screws on the rear chassis cover, then
remove the cover from the system.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
25
Installing a TPM Module
The TPM module package includes the following items:
1. Locate the standoffs for installing the TPM module.
TPM Cable
Mounting Screws
TPM Module
eLITE610 User Manual