Security; Boot - Nexcom APPC 3154 User Manual

Chapter 4: BIOS Setup

Security

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.

Boot

Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Boot
This section is used to configure the boot features.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Chipset
Boot Configuration
Bootup NumLock State
Fast Boot
Network
Onboard LAN PXE
Boot Option Priorities
Boot Option #1
Boot Option #2
Hard Drive BBS Priorities
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the
numeric keypad is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.
Fast Boot
When enabled, the BIOS will shorten or skip some check items during POST.
This will decrease the time needed to boot the system.
62
Security Boot Save & Exit
Select the keyboard NumLock
state
[On]
[Disabled]
[Enabled]
[Disabled]
[SATA PM: TOSHIBA M. . .]
[UEFI: Built-in EFI . . .]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
APPC 3154 User Manual